Air intake system using requirements has an intimate relationship with turbocharger using life

Air intake system using requirements has an intimate relationship with turbocharger using life

Keywords: turbocharger, turbo charger actuator supplier, turbo charger actuator for borgwarner

The turbocharger is working under an extremly environments , so, Not only the lubricating oil system should be paid attention to , but also the air intake system.

So, what are the using requirements we should be careful regarding the air intake system?

Firstly, The air intake of compressor’s negative pressure, applied on Auto Filter, should be stipulated and limited as following claims.

The medium diesel engine: 3kpa(0.03kgf/ c㎡), The heavy diesel engine: 3.5kpa(0.036kgf/ c㎡)

Secondly, The Air Filter should be cleaned or replaced if the negative pressure of compressor air intake has exceeded 6.5kpa(0.064kgf/ c㎡).

Thirdly, The turbo exhaust back pressure should be less than 0.0kpaG(0.1kgf/ c㎡G), The limiting value should obey  the instruction manual as a reference when you use exhaust braking.

At last, Turbine inlet temperature should be less than 70 degree centigrade.

 

SACER LTD

 Sacer is a professional turbo charger actuator supplier, which is committed to developing close partnerships with turbo customers,  enabling them to minimize-time-to market, and maximize ROI

 

Such as , We could provide actuator replacement for BMW,AUDI,FORD and so on. We also have turbo charger actuator for borgwarner . If you need turbo charger actuator , please contact us.

Contact information:

E-mail: [email protected]

Phone: +86 755 22200020

Website: www.turbosacer.com